Android Firmware Huawei P6-C00 Fastboot

Android Firmware Huawei P6-C00 Fastboot

[华为P6-C00]_{anan}_127879_P6-C00_V100R001C92B120_4.2.2_20150505153618_tw.zip 672.4 Mb

[Huawei P6-C00] _ {anan} _127879_P6-C00_V100R001C92B120_4.2.2_20150505153618_tw.zip

Huawei.P6-C00.anan.127879_V100R001C92B120_4.2.2.fastboot.zip

http://d-h.st/sdzL

----------------------

P6联通版恢复官方并救砖.rarßsee (654M)

Unicom.version.of.P6b120.recovery.rescue.official.brick.wire.brush.rar

Unicom version of P6 Huawei B120 wire brush package (see Yan dust produced mobile version wire brush package)

1, extract wire brush package to your computer, and then install the Handset WinDriver.exe, which is connected to the computer P6 drivers.

2, with a USB cable to the computer and mobile phone;

3. Double-click Execute update_stack.bat script;

3. Follow the prompts to restart the phone (press the power button);

4, after the phone is switched on, press the power button and the volume down key, will enter and stop at the first boot screen;

5, this time if the script on the computer continue to go down, that is, brush machine began;

6, if the script on the computer does not continue to go down, repeat steps 3 and 4;

7, brush system.img and cust.img takes a long time, about 10 minutes, please be patient.

8, after brushing reboot into the system, reset the factory settings.

@echo off

echo.

echo 此线刷包为华为p6联通版B120版本，请确认后继续。 Ctrl+C 退出

pause

echo.

echo 请重启手机，开机时按着电源键和音量减键不放，待进入开机第一屏后，脚本会继续运行，再放开按键。

echo 正在更新 fastboot.img ……

fastboot.exe flash fastboot export/fastboot.img

echo.

echo 正在更新 boot.img ……

fastboot.exe flash boot export/boot.img

echo.

echo 正在更新 recovery.img ……

fastboot.exe flash recovery export/recovery.img

echo.

echo 正在更新 efi.img ……

fastboot.exe flash efi export/efi.img

echo.

echo 正在更新 crc.img ……

fastboot.exe flash crc export/crc.img

echo.

echo 正在更新 curver.img ……

fastboot.exe flash curver export/curver.img

echo.

echo 正在更新 md5rsa.img ……

fastboot.exe flash md5rsa export/md5rsa.img

echo.

echo 正在更新 verlist.img ……

fastboot.exe flash verlist export/verlist.img

echo.

echo 正在更新 batt.img ……

fastboot.exe flash batt export/batt.img

echo.

echo 正在更新 modemimage.img ……

fastboot.exe flash modemimage export/modemimage.img

echo.

echo 正在更新 userdata.img ……

fastboot.exe flash userdata export/userdata.img

echo.

echo 正在更新 cache.img ……

fastboot.exe flash cache export/cache.img

echo.

echo 正在更新 system.img，时间会较长，请耐心等待……

fastboot.exe flash system export/system.img

echo.

echo 正在更新 cust.img ……

fastboot.exe flash cust export/cust.img

echo.

echo 更新完成，若手机未自动重启，请长按电源键10秒手动重启。

fastboot reboot

pause

--------------------

http://d-h.st/qWV0

------------

华为P6移动版B120SP1线刷包.7z (670M)

HuaweiP6mobileversionB120SP1wirebrushpackage.zip

HuaweiP6mobileversionB120SP1.fastboot.zip

http://d-h.st/XmC1

Huawei P6 mobile version B120SP1 wire brush package

1.     Please install Handset WinDriver.exe, which is connected to the computer P6 drivers.

2 Press and hold the power button and the volume down key, will enter and stop at the first boot screen; with a USB cable to the computer and mobile phone;

3. Double-click to perform a key Brush .bat script;

4, brush system.img and cust.img takes a long time, about 10 minutes, please be patient.

5, after brushing reboot into the system, reset the factory settings.

Will not be able to log on QQ, then add me QQ9537075

Contact me help you solve.

pause 

@echo off 
echo 请重启手机，开机时按着电源键和音量减键不放，待进入开机第一屏后，脚本会继续运行，再放开按键。 

echo 正在更新 fastboot.img …… 
fastboot.exe flash fastboot export/fastboot.img 
echo. 
echo 正在更新 boot.img …… 
fastboot.exe flash boot export/boot.img 
echo. 
echo 正在更新 recovery.img …… 
fastboot.exe flash recovery export/recovery.img 
echo. 

echo 正在更新 efi.img …… 
fastboot.exe flash efi export/efi.img 
echo. 

echo 正在更新 crc.img …… 
fastboot.exe flash crc export/crc.img 
echo. 
echo 正在更新 curver.img …… 
fastboot.exe flash curver export/curver.img 
echo. 
echo 正在更新 md5rsa.img …… 
fastboot.exe flash md5rsa export/md5rsa.img 
echo. 
echo 正在更新 verlist.img …… 
fastboot.exe flash verlist export/verlist.img 
echo. 

echo 正在更新 batt.img …… 
fastboot.exe flash batt export/batt.img 
echo. 
echo 正在更新 modemimage.img …… 
fastboot.exe flash modemimage export/modemimage.img 
echo. 

echo 正在更新 userdata.img …… 
fastboot.exe flash userdata export/userdataimg 
echo. 

echo 正在更新 cache.img …… 
fastboot.exe flash cache export/cache.img 
echo. 

echo 正在更新 system.img，时间会较长，请耐心等待…… 
fastboot.exe flash system export/system。img 
echo. 
echo 正在更新 cust.img …… 
fastboot.exe flash cust export/cust.img 
echo. 

echo 更新完成，按任意键重启。 

fastboot reboot 
pause

-------------------

If above information is useful for you, please like my page Open my Page in New Tab and Like it

====++++{{{{{{{https://www.facebook.com/MusicSoftwareMedical  }}}}}}}++++====